Basic working principle of the equipment
Cable pulling capston winch has a rope drum which can accommodate the required diameter of the wire rope on it and this rope is taken out through a double capston unit and is guided out to the target through pulleys. This unit is powered by a diesel engine which drives a closed loop hydraulic pump, which in turn develops oil pressure and supplies this oil to the hydro motor which drives the double capstan via., Gear box thereby pulling the wire rope.
Ask For Price Download BrochureCable Pulling capston winch – Hydraulically operated to be primarily used for underground cable pulling, the unit has a pulling capacity of 50KN and is designed to a pull length of 1250mts. it is powered by a turbo charged diesel engine.
| Specification | Value |
| Dimensions of the Unit | 4000 mm(L)X1800 mm(W) X 1800mm(H) |
| Power Source | Three cylinder turbo charged diesel engine |
| Power of the Diesel Engine | 23KW/36 hp at 2500 RPM |
| Make of the Diesel Engine | Yanmar/Mitsubishi |
| Engine Cooling | Water Cooled |
| Rated Fuel Consumption | 4.0 litre per hour at 1500rpm |
| Min Fuel Consumption | 3.85 litre per hour at 1500rpm |
| Electrical Control Voltage | 12V |
| Method of Hydraulic oil cooling | Oil cooler with thermostat fan |
| No of wheels provided | 2 no.s |
| Canopy for the total unit | Provided |
| Rope Guide Unit for Drum | Angle Fleet Compensator |
| Max. working hydraulic pressure | 250 Bar |
| Hydraulic Pump | Closed Loop unit with Manual Servo Control |
| Capstan Diameter | 210 mm |
| Type of Capstan | Double |
Features of the reputed brands used in the unit
- Emergency stop button on the control panel with a possibility to by-pass the hydraulic circuit in order to release the line pull in case of emergency.
- Emergency stop button with the above features in the operator console with 5 mts cable "optional"
- Auto cut-off of the hydraulic unit when the load on the machine exceeds the set load on the HMI
- Resetting button can only be operated as per the designed procedure.
- Two sets of anchoring jacks are provided on the side of the machine.
- Complete rope guiding mechanism provided between rope drum and the output guide.
- The unit is provided with a canopy.
- Rope guide unit to compensate higher angular pull of wire rope.